柔性壁面湍流边界层相干结构控制的实验研究

本文利用热膜测速技术对刚性壁面和柔性壁面湍流边界层的流向速度分量进行了实验测量,首先研究了柔性壁面对平均速度分布和湍流度分布的影响,结果表明:柔性壁面的边界层速度分布在对数律层向上有所平移,缓冲层加厚,具有一般的壁面减阻特征;而柔性壁的湍流度比刚性壁的湍流度要低,分布也更为平坦。然后综合运用自相关法和条件采样技术研究了湍流近壁区的相干结构,结果表明:刚性壁自相关曲线的第二峰值出现的时间比柔性壁的短,柔性壁的猝发频率比刚性壁的低许多。实验结果表明柔性壁面具有一定的减阻作用。     

Computer algebra-perturbation solution to a nonlinear wave equation

In this paper, the higher-order asymptotic solution to the Cauchy problem of a nonlinear wave equation is found by using a computer algebra-perturbation method. The secular terms in the solution from straightforward expansions are eliminated with the straining of characteristic, coordinates and the use of the renormalization technique, and the four-term uniformly valid solution is obtained with the symbolic computation by using a computer algebra system. The comparison of the derived asymptotic solution and the numerical solution shows that they coincide with each other for smaller ε and agree quite well for larger ε (e. g., ε=0.25) Project supported by the National Natural Science Foundation of China and Shanghai Municiple Natural Science Foundation     

三种典型磨粒磨损磨屑形成过程的研究

作者利用扫描电子显微镜、光学显微镜和计算机图象分析系统,对3种典型磨粒磨损磨屑的形成特点和典型试验条件下材料的磨粒磨损过程进行了研究。结果表明,在磨粒磨损条件下,典型的磨屑形态主要是切屑和块状屑,同时还有极少量的球状屑和花状屑。作者指出,切屑和块状屑分别是磨粒与被磨材料表面一次和多次相互作用的产物。在三体磨粒磨损条件下,切削是造成编号为2M和3M等硬质材料磨损的主要原因,也是4M和几种奥氏体锰钢在高载荷下磨损的重要形式;块状屑的形成是塑性较好的材料在各种磨损条件下磨损的主要形式。球状屑的形成是磨粒与被磨材料表面的接触点产生高温致使材料熔化的结果。球状屑一般是中空且表面有很多孔洞的球壳,其形成与气体有关。     

大变位时物体变形测量的相关性恢复方法

本文提出根据白光散斑图像数据模拟刚体位移复位的相关性恢复方法，以解决物体大变位情况下的变形测量问题     

Full-field speckle pattern image correlation with B-Spline deformation function

A full-field speckle pattern image correlation method is presented that will determine directly the complete, two-dimensional deformation field during the image correlation process on digital images obtained using computer vision systems. In this work, a B-Spline function is used to represent the object deformation field throughout the entire image area. This is an improvement over subset-based image correlation methods by implicitly maintaining position and derivative continuity constraints among subsets up to a specified order. The control point variables within the B-Spline deformation function are optimized iteratively with the Levenberg-Marquardt method to achieve minimum disparity between the predicted and actual deformed images. Results have shown that the proposed method is computationally efficient, accurate and robust. The general framework of this method can be applied ton-dimensional image correlation systems that solve for multi-dimension vector fields.     

计算机模拟升降法试验的研究

介绍了计算机模拟感度试验的原理，运用计算机模拟方法研究了升降法试验的初始参数选择对感度分布参数估计精度的影响，取得了对升降法有利的试验条件。     

Mathematical Modeling and Parameter Identification of a Planar Servo-Pneumatic Test Facility. Part I: Mathematical Modeling and Computer Simulation

High quality multi-axis test facilities used for testing heavy loads and large structures of industrial equipment are usually simulated, designed and controlled based on reduced model equations neglecting the inertia properties of the actuators. The design and control of servo-pneumatic test facilities used for testing small and light structures must take into account extended test facility models including the various inertia properties of the actuators. In this paper (Part I) an extended test facility model is presented including the various inertia properties and joints of the actuators. These extended model equations are represented in a form well suited to be directly implemented in control algorithms based on exact linearization techniques for real time control. This is done by stepwise projecting the inertia properties of the various actuator housings and actuator pistons down to the common mass of the test table and payload. The resulting extended model equations have the same form as the reduced model equations. They only include more complex system matrices and vector functions. These compact model equations turn out to be suitable for an efficient nonlinear controller design of these test facilities. Computer simulations and associated laboratory experiments show the necessity to use extended model equations in case of testing small and light structures. In Part II of this paper [1] the inertia parameters of the planar test facility will be identified in laboratory experiments.     

抽样定理法重建流场的三维温度分布

结合气流场温度较低，只能得到较少干涉条纹的实际情况，提出了采用轴样定理法重建流场的三维温度分布的模型，并考查了该方法的计算机模拟运算结果，对具体的对象，进行了实验，并采用图像处理方法对条纹进行了一系列处理，最后重建了二个截面上的温度分布。     

用ADINA确定热电厂磨煤机打击轮磨损极限

利用ＡＤＩＮＡ程序计算磨损后打击轮的应力分布状态；根据强度理论，得到磨损极限，为打击轮维修提供了依据．实践证明，不超过磨损极限的打击轮修复以后可以满足使用精度要求，其使用期限与新的打击轮相同．磨损极限的确定为国家创造了经济效益     

多模式自适应重要抽样法及其应用

针对多模式的可靠性分析，研究了其失效概率计算的自适应重要抽样法，该方法用模拟退火 算法来自动调整每个失效模式的重要抽样函数，使其逐渐趋近于估计方差最小的重要抽样 函数. 对于多个模式系统失效概率的计算，采用混合加权自适应重要抽样的方法, 反映了每个 失效模式对系统失效概率的贡献；对于系统失效模式所含基本变量不全相同的情况，提出了 扩展自适应重要抽样法, 来统一所有失效模式中的基本变量，从而使得混合自适应 重要抽样, 可以方便地求解变量不全相同时的系统失效概率. 对估计值方差和变异系数的计算公 式进行了推导. 验证算例结果, 充分说明方法的合理性与可行性.